11mm broach in hammerhead for extended reach adjustment of Haldex and Gunite slack adjusters
Check wheel lug wedges and spacers for tightness
Manipulate pintle hooks
General purpose hammer
Shaft Highlights
Extended reach for checking and setting brakes. Allows extra torque for partially seized adjusting nuts or slack adjusters
Hooking slack adjusters to give the slack adjuster a pull
Pull stuck locking collars back into locked position
Pull bearing housing inspection cap and also helps re-insert the cap
Use to pull pawl out on Rockwell automatics to enable you to back the adjuster off
Use to hook into 5th wheel rod to use as a 5th wheel pull
Use to manipulate reefer controls from ground or hard to reach valve levers, etc
Wrench Head Highlights
End 9/16" for manual slack adjusters extended reach
Side 9/16" wrench head 12 point for close up work in confined situations where short swing is neccessary
Side 11mm wrench head 12 point for close up work in confined situations where short swing is neccessary
5/16" 8 point wrench head on bottom of claw/wrench head component for Rockwell automatic slack adjusters.
Works well for extended reach and confined areas
Workmanship & Manufacturing Highlights
Made of T1 metal
All in one tool, no extra parts to purchase
Patent Pending
Made in Canada
Tool consists of 4 components that are replaceable in case something should ever happen to any one component - You only have to replace the component and not the whole tool
Loctite "721" is used on the threads
Component replacement kits will include loctite "721" if you ever need to replace a component
The TRUCKIRON is guaranteed against flaws in material and workmanship for a period of one year from date of purchase